Madecassoside 90
- Assay
- Not less than 90.0%
- Appearance
- Off-white powder
- Test
- HPLC
PH-NP 001 · PRODUCT DATA
Madecassoside
Botanical Active Ingredient Supplier
Centella asiatica derived constituent
A water-soluble, off-white cosmetic ingredient supplied in 90% and 95% assay grades. Product identity and batch acceptance are confirmed through the current specification and corresponding COA.
- INCI
- Madecassoside
- Grade
- Not less than 90.0% / Not less than 95.0%
- Form
- Off-white powder
- Solubility
- Water-soluble
This page describes ingredient identity, specification and technical review points. It does not establish a finished-product efficacy or regulatory claim.
QUICK ANSWER
Madecassoside at a glance
PINHONBIO supplies Madecassoside as product PH-NP 001 in Not less than 90.0% / Not less than 95.0% grades. It is supplied as off-white powder and reviewed using HPLC. Confirm the selected grade against the current Specification and corresponding batch COA.
IDENTITY & PROPERTIES
Confirm the product before evaluating the claim.
Product name, code, grade, label and batch documents should point to the same material. This is the foundation for technical, quality and purchasing review.
- Product name
- Madecassoside
- Product code
- PH-NP 001
- CAS
- 34540-22-2
- INCI
- Madecassoside
- Source
- Centella asiatica derived constituent
- Form
- Off-white powder
- Solubility
- Water-soluble
- Test method
- HPLC
Madecassoside is a defined constituent. It should not be treated as an automatic synonym for Centella total glycosides or a general Centella extract.
GRADE SELECTION
Choose the grade, then check its batch.
Listed grades describe the commercial options in the current source material. Contract requirements and acceptance criteria belong in the current specification and purchase agreement.
Madecassoside 95
- Assay
- Not less than 95.0%
- Appearance
- Off-white powder
- Test
- HPLC
| Review item | Listed requirement | Method or evidence |
|---|---|---|
| Assay | 90% grade: not less than 90.0%; 95% grade: not less than 95.0% | HPLC |
| Appearance | Off-white powder | Visual inspection |
| Solubility | Water-soluble | Conditions confirmed in TDS and formulation trial |
| Loss on drying | Not more than 5.0% | Current specification method |
| Madecassoside B | Controlled according to the applicable grade | Batch result reported in COA |
COMPOSITION & ACTIVE CONTENT
Read composition in the context of the selected grade.
For a defined molecule, active content is normally expressed through identity and assay. For an extract or multi-component ingredient, marker content, carrier and composition need to be reviewed together.
- Material identity
- Madecassoside
- Listed content
- Not less than 90.0% / Not less than 95.0%
- Analytical method
- HPLC
- Composition evidence
- Current Specification and corresponding batch COA
The listed assay or grade must not be interpreted as a finished-product efficacy claim. For extracts, request confirmation of the plant identity, plant part, marker definition, carrier and extraction information where applicable.
FORMULATION REFERENCE
Use the formula conditions to guide evaluation.
These are starting points for technical screening. Final suitability depends on the complete system, process, packaging and stability program.
Aqueous serumsEssencesEmulsionsCreamsMasks
- Reference use range
- 0.05% to 1.0%
- Reference pH
- pH 4 to 7
- Solubilization
- Confirm concentration, temperature and addition procedure in the current TDS
- Before scale-up
- Complete solubility, compatibility and stability evaluation in the finished formula
SOLUBILITY, COMPATIBILITY & STABILITY
Confirm performance in the complete formulation.
Supplier information supports initial screening. Compatibility and stability must still be demonstrated in the customer's formula, process and packaging.
- Solubility
- Water-soluble
- pH window
- Confirm in the current TDS and formulation trial
- Process temperature
- Confirm the addition temperature and exposure time before scale-up
- Compatibility
- Evaluate with solvents, surfactants, electrolytes, preservatives and other actives in the complete system
- Stability checks
- Monitor appearance, odor, color, clarity, precipitation and active-content change under the intended program
- Packaging
- Include the intended primary pack in compatibility and stability evaluation
QUALITY & REGULATORY SUPPORT
Match quality evidence and regulatory review to the destination market.
Availability and applicability vary by ingredient, grade, batch and intended market. A document being available does not by itself establish finished-product compliance.
Identity and batch acceptance
Review the product code, grade, test method, current Specification and corresponding batch COA together.
Relevant contaminant controls
Request applicable microbiology, heavy metals, residual solvents, pesticides or other risk-based controls for the selected ingredient.
Market-specific status
IECIC, REACH, TSCA and other inventory or notification questions are confirmed for the specific material and destination market upon request.
Project-specific statements
Vegan, GMO, allergen, animal-testing and related declarations are supplied only when supported by the applicable product file.
Review PINHONBIO analytical capabilities, testing scope and third-party verification approach →
DOCUMENTATION
Confirm the grade before requesting documents.
After the target specification is confirmed, PINHONBIO provides the corresponding available TDS, Specification, SDS, batch COA or testing files.
Confirm Specification & Request Documents →01TDSTechnical data and formulation guidance
02SpecificationProduct acceptance criteria
03SDSSafety and handling information
04Batch COAResults for the corresponding batch
05Regulatory and safety filesProvided according to product and project scope
PACKAGING
Packaging
1 kg per aluminium foil bag. Outer packaging and label details are confirmed with the order.
STORAGE
Storage
Store sealed in a cool, dry place, protected from light and moisture. 24 months under the stated storage conditions. Reseal carefully after opening.
BEFORE ORDERING
Project confirmation
Confirm the grade, quantity, destination market, formula format, required documents, lead time and acceptance terms in writing.
FAQ
Common questions about Madecassoside
Answers describe the current information boundary. Project-specific decisions should use written confirmation and current official documents.
Browse the buyer and formulator FAQ →Which Madecassoside grades are listed?
PH-NP 001 is listed in 90% and 95% assay grades. Confirm the selected grade, current specification and batch COA before purchase.
Is Madecassoside the same as Centella total glycosides?
No. Madecassoside is a defined constituent, while Centella total glycosides describe a multi-constituent specification system. Product name, code, specification and COA should be checked separately.
How should the reference use range be applied?
The listed 0.05% to 1.0% range is a formulation reference. Final use level, solubilization procedure and stability must be confirmed in the customer's own formula and against the current TDS.
Which documents can buyers request for Madecassoside?
Available files may include the current TDS, Specification, SDS and a COA for the corresponding Madecassoside batch. Additional regulatory or testing files depend on the selected grade and project scope.
How can I request a Madecassoside sample or quotation?
Send PINHONBIO the product code PH-NP 001, required grade, quantity, destination market and intended formulation format. Sample availability, quotation terms and documents are then confirmed in writing.
PROJECT REQUEST
Ready to evaluate Madecassoside?
Request a quotation, sample or current technical documents. Include the destination market and formulation conditions when available.